#1 12/10/2017 13:11:16

Date d'inscription: 15/02/2017
Messages: 2692

Solid wood floor renovation steps

<P>1, the use of large-scale renovation of the floor several times to remove the paint paint, surface, wood layer of about 0.5 mm, and then carefully sanding the floor surface delicate,напольная плитка для террасы на крыше smooth to a new state. The corner of the floor is polished using a small angle grinder to achieve the overall smoothing effect.</P>
<P>2, the original side seam transparent putty removed, re-sealing, and then the whole floor of the floor sealed primer, to be dry. To be dry after the paint,хардтопные панели для строительства беседки brush the first time finish, to be dry. Carefully sanded with water sandpaper, the surface layer grinding to slightly rough, remove the powder.</P>
<P>3, according to the above procedures brush three to four times the finish,стоимость деревянных панелей для облицовки the last time without grinding. To be the last time after the dry finish on the floor wax can be.</P>

http://compositefencewholesale.com   -buy composite fence decking

Hors ligne


Pied de page des forums

Propulsé par PunBB
© Copyright 2002–2007 Rickard Andersson
Traduction par PunBB.fr